• High UPS reliability
• Total microprocessor and DSP control.
• Interruption-free static and manual bypass.
• Specifications guaranteed up to 40°C (the components are designed to work at high temperatures and thus are subject to less stress at normal temperatures).

Parallelable Parallel configuration of 3 units for (2+1) redundant or power parallel system. The UPS continue to operate in parallel even if the connection cable is interrupted (Closed Loop).

Unity Power Factor

• More power delivered
• More real output power (W) Operating mode selection The operating mode can be programmed via software or manually via the front display panel.
• On line: efficiency up to 95%.
• Economy Mode: to increase efficiency (up to to 98%), allows for the selection of Line Interactive technology (VI) to power low priority loads from the mains supply.
• Smart Active: the UPS automatically decides upon the operating mode (VI or VFI) based on the quality of the mains power supply.
• Emergency: the UPS can be selected to function only when the mains power supply fails (emergency only mode).
• Frequency converter operation (50 or 60 Hz). High quality output voltage • Even with non-linear loads (IT loads with a crest factor of up to 3:1).
• High short circuit current on bypass.
• High overload capacity: 150% by inverter (even with mains failure).
• Filtered, stabilized and reliable voltage (double conversion on-line technology – VFI compliant with EN62040-3), with filters for the suppression of atmospheric disturbances.
• Power factor correction: UPS input power factor close to 1 and sinusoidal current uptake. Simplified installation
• UPS can be installed on a single-phase or three-phase distribution network STW 8000 and STW 10000. • Output terminal board + 2 IEC sockets for powering local consumers (computers, devices, etc.).
• Simplified positioning (built-in castors).

High battery reliability

• Automatic and manual battery test.
• Proper battery care is critical to ensuring correct UPS operation in emergency conditions.

The Riello UPS battery care system consists of a series of features and capabilities to optimise battery management and obtain the best performance and operating life possible.

• Unlimited extendible runtime using matching Battery Boxes.
• The batteries do not cut in during mains failures of 20 kHz, value above audible range).
• Auto restart (automatic when mains supply is restored, programmable via software.
• Emergency function: the UPS can be selected to function only when the mains power supply fails (emergency lights).
• Back-feed protection standard: to prevent energy from being fed back to the network.
• UPS digital updating (internal flash memory). Advanced communications
• Compatible with Riello Connect remote monitoring.
• Advanced multi-platform communications for all operating systems and network environments: PowerShield3 monitoring and shutdown software for Windows operating systems 10, 8, 7, Hyper-V, 2019, 2016, 2012 and previous versions, Mac OS X, Linux, VMWare ESXi, Citrix XenServer and other Unix operating systems.
• RS232 serial and USB ports.
• Plug and play function.
• Slot for installation of communications boards.