Neo UPS uses double conversion technology to provide clean, high level quality power to fully protect mission-critical devices such as communications networks, small computer centers, servers, telecoms applications and industrial applications.
Wide input voltage range (110 V -300 V)
Neo provides stable power to connected devices under unstable power environments.
Programmable power management outlets
With programmable power management outlets, users can easily and independently control load segments. During power failure, this feature enables users to extend battery time to mission-critical devices by shutting down the non-critical devices.
ECO mode operation for energy saving
Offers efficiency up 97% to reduce energy usage & operation cost. UPS supplies the loads via static bypass, timely returning to online double conversion when the need arises.
50/60 Hz Frequency Converter Mode
Lock output frequency at 50Hz or 60Hz to supply power sensitive equipments.
Emergency Power Off (EPO) Function
This feature can secure the personnel and equipment in case of emergency.
Parallel System (Neo 6K και 10Κ)
Neo 6K & 10K models can be used in parallel operation with up to 3 units. This function increases power capacity, safety and availability.
Maintenance bypass (Neo 6Κ & 10Κ)
Internal maintenance bypass assures continuous power to critical devices during UPS maintenance.
Smart battery charger design to optimize battery performance
Neo series is equipped with 2 or 3 stage charger in order to guarantee battery recharge time. Besides, it will adjust charging voltage according to the temperature. These features will extend the service life of batteries.
SNMP + USB + RS-232 multiple communications
The communication of the UPSP is done via the USB or RS-232 and also with SNMP interface.
|Neo 1K||Neo 1,5K||Neo 2K||Neo 3K||Neo 6K||Neo 10K|
|PHASE 1 phase in / 1 phase out|
|Voltage Range||Low Line|
|160 VAC ± 5% or 80 VAC ± 5% @ 100% load||176 VAC ±3% @ 100% load|
|110 VAC ± 5% or 50 VAC ± 5% @ 50% load||110 VAC ±3% @ 50% load|
|175 VAC ± 5% or 85 VAC ± 5% @ 100% load||186 VAC ± 3% @ 100% load|
120 VAC ± 3% @ 50% load
|300 VAC ± 5% or 150 VAC ± 5%||300 VAC ± 3%|
|290 VAC ± 5% or 145 VAC ± 5%||290 VAC ± 3%|
|Frequency Range||40 Hz ~ 70 Hz||46 ~ 54 Hz or 56 ~ 64 Hz|
|Power Factor||≥ 0.99 @ nominal voltage (100% load)||≥ 0.99 @ 100% load|
|AC Voltage Regulation (Batt. Mode)||± 3%||± 1%|
|47~53 Hz or 57~63 Hz||46 ~ 54 Hz or 56 ~ 64 Hz|
|Frequency Range (Batt. Mode)||50 Hz ± 0.25 Hz or 60Hz ± 0.3 Hz||50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz|
|Current Crest Ratio||3:1|
|Harmonic Distortion||≤ 3% THD (Linear Load)||≤ 4% THD (Linear Load)||≤ 3% THD (Linear Load)|
|≤ 6% THD (Non-Linear Load)||≤ 7% THD (Non-Linear Load)||≤ 6% THD (Non-Linear Load)|
|Transfer Time||AC Mode to Batt. Mode||Zero|
|Inverter to Bypass||4 ms (Typical)||Zero|
|Waveform (Batt. Mode)||Pure sine wave|
|Battery Type||12V / 7AH||12V / 9AH||12V / 7AH||12V / 9AH||12 V / 7 AH||12V / 9AH|
|Typical Recharge Time||4 hours recover to 90% capacity||7 hours recover|
to 90% capacity
|9 hours recover|
to 90% capacity
|Charging Current (max.)||1.0 A|
|Charging Voltage||41.0 VDC ± 1%||82.1 VDC ± 1%||273 VDC ± 1%|
|LCD Panel||UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions|
|Battery Mode||Sounding every 4 seconds|
|Low Battery||Sounding every second|
|Overload||Sounding twice every second|
|Dimension, D X W X H (mm)||397 x 145 x 220||421 x 190 x 318||592 x 250 x 576|
|Net Weight (kgs)||13||14||26||28||81||83|
|Humidity & Temperature||20-90 % RH @ 0- 40°C (non-condensing)|
|Smart RS-232||Supports Windows 98/2000/2003/XP/Vista/2008, Windows 7, Linux and MAC|
|SNMP||Power management from SNMP manager and web browser|
Download the Pdf here