Neo Rack (1000-10000VA)

Home » Products » UPS » On Line » Neo Rack (1000-10000VA)

Neo Rack (1000-10000VA)

On Line UPS

The range Neo Rack uses double conversion technology to provide clean, high level quality power to fully protect mission-critical devices such as communications networks, small computer centers, servers, telecoms applications and industrial applications.

Features

Technical Specifications

Product Brochure

Main features:

Wide input voltage range (110V-300V)

Neo Rack provides stable power to connected devices under unstable power environments.

Programmable power management outlets

With programmable power management outlets, users can easily and independently control load segments. During power failure, this feature enables users to extend battery time to critical loads by shutting down the non-critical devices.

ECO mode operation for energy saving

Offers efficiency up to 97% to reduce energy usage & cost. UPS supplies the loads via static bypass, timely returning to online double conversion when the need arises.

50/60 Hz Frequency Converter Mode

Lock output frequency at 50Hz or 60Hz to supply sensitive equipments.

Emergency Power Off (EPO) Function

This feature can secure the personnel and equipment in case of emergency.

Maintenance bypass available (Neo Rack 6Κ & 10Κ)

Internal maintenance bypass assures continuous power to critical devices during UPS maintenance.

Parallel System (Neo Rack 6K &10Κ)

Neo rack 6K & 10K models can be used in parallel operation with up to 3 units. This function increases power capacity, safety and availability.

DSP technology applied for Neo Rack 6K & 10K

A DSP controller provides an improved and cost-effective solution with high performance.

Smart battery charger design to optimize battery performance

The Neo Rack range is equipped with 2 or 3 stage charger designed to guarantee battery recharge time. Also, it adjusts charging voltage according to the temperature. These features extends the storage capacity and the life cycle of the batteries.

SNMP + USB + RS-232

The communication of the UPSP is done via the USB or RS-232 and also with SNMP interface.

MODELS			Neo 1K RACK	Neo 1.5K RACK	Neo 2K RACK	Neo 3K RACK	Neo 6K RACK	Neo 10K RACK
PHASE			Single Phase Input / Single Phase Output
CAPACITY			1000VA / 800W	1500VA / 1200W	2000VA / 1600W	3000VA / 2400W	6000VA / 4800W	10000VA / 8000W
INPUT
Voltage Range	Low Line Transfer		160 VAC ± 5% or 80 VAC ± 5% @ 100% load				176 VAC ± 3% @ 100% load
			110 VAC ± 5% or 50 VAC ± 5% @ 50% load				110 VAC ± 3% @ 50% load
	Low Line Comeback		175 VAC ± 5% or 85 VAC ± 5% @ 100% load				186 VAC ± 3% @ 100% load
							120 VAC ± 3% @ 50% load
	High Line Transfer		300 VAC ± 5 % or 150 VAC ± 5 %				300 VAC ± 3%
	High Line Comeback		290 VAC ± 5 % or 145 VAC ± 5 %				290 VAC ± 3%
Frequency Range			40 Hz ~ 70 Hz				46~54 Hz or 56~64 Hz
Power Factor			≧ 0.99 @ nominal voltage (100% load)				≧ 0.99 @ 100%load
OUTPUT
AC Voltage Regulation (Batt. Mode)			± 3%				± 1%
Frequency Range (Synchronized Range)			47 ~ 53 Hz or 57 ~ 63 Hz				46~54 Hz or 56~64 Hz
Frequency Range (Batt. Mode)			50 Hz ± 0.25 Hz or 60Hz ± 0.3 Hz				50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
Current Crest Ratio			3:1
Harmonic Distortion			≦ 3 % THD (Linear Load)		≦ 4 % THD (Linear Load)		≦ 3 % THD (Linear Load)
			≦ 6 % THD (Non-linear Load)		≦ 7 % THD (Non-linear Load)		≦ 6 % THD (Non-linear Load)
Transfer Time		AC Mode to Batt. Mode	Zero
		Inverter to Bypass	4 ms (Typical)				Zero
Waveform (Batt. Mode)			Pure Sinewave
EFFICIENCY
AC Mode			85%		88%		89%
Battery Mode			83%				88%
BATTERY
Battery Type			12 V / 7 Ah	12 V / 9 Ah	12 V / 7 Ah	12 V / 9 Ah	12 V / 7 Ah	12 V / 9 Ah
Numbers			3	3	6	6	20	20
Typical Recharge Time			4 hours recover to 90% capacity				7 hours recover to 90% capacity	9 hours recover to 90% capacity
Charging Current (max.)			1.0 A
Charging Voltage			41.0 VDC ± 1%		82.1 VDC ±1%		273 VDC ±1%
INDICATORS
LCD Panel			UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions
ALARM
Battery Mode			Sounding every 4 seconds
Low Battery			Sounding every second
Overload			Sounding twice every second
Fault			Continuously sounding
PHYSICAL
Dimension, H x W x D			2U x 19′ x 420mm		3U x 19′ x 580mm		UPS: 3Ux19′ x 580mm	UPS : 3U x 19′ x 668mm
							Battery Pack : 3U x 19′ x 580mm	Battery Pack : 3U x 19′ x 580mm
Net Weight (kgs)			16	17	29	31	UPS Unit : 17	UPS Unit : 20
							Battery Pack : 57	Battery Pack : 63
ENVIRONMENT
Humidity			20-90 % RH @ 0- 40°C (non-condensing)
Noise Level
COMMUNICATION
Smart RS-232/USB			Supports Windows 98/2000/2003/XP/Vista/2008, Windows 7, Linux and MAC
Optional SNMP			Power management from SNMP manager and web browser

Download the Pdf here