Othonos 39, 17343
Agios Dimitrios Athens
Mon-Fri
08:30 - 16:30
+30 2109966555
+30 2109969444

Sentinel Power Green (6 – 20 kVA)

Sentinel Power Green (6 – 20 kVA)

On Line UPS

Sentinel Power Green is the ideal solution for protecting IT systems, telecommunications equipment and mission critical systems such as safety devices, ensuring maximum power reliability. Sentinel Power Green is designed and built using state-of-the-art technology and components to provide maximum protection to the powered loads with no impact on downstream systems and optimised energy savings.
With on-line double conversion technology (VFI): the load is powered continuously by the inverter which supplies a sinusoidal voltage, filtered and stabilised in terms of form and frequency.
Input and output filters provide significant further immunity from mains disturbances and lightning strikes.
In terms of technology and performance, Sentinel Power Green is one of the best UPS available on the market today.

 

Features

Technical Specifications

Product Brochure

Main features:

High UPS reliability

  • Total microprocessor control.
  • Interruption-free static and manual bypass.
  • Specifications guaranteed up to 40°C (the components are designed to work at high temperatures and thus are subject to less stress at normal temperatures).

Parallelable
Parallel configuration of 3 units for (2+1) redundant or power parallel system. The UPS continue to operate in parallel even if the connection cable is interrupted (Closed Loop).

Operating mode selection
The operating mode can be programmed via software or manually via the front display panel.

  • On line: double conversion Mode: for critical applications.
  • Economy Mode: to increase efficiency (up to to 98%), allows for the selection of Line Interactive technology (VI) to power low priority loads from the mains supply.
  • Smart Active: the UPS automatically decides upon the operating mode (VI or VFI) based on the quality of the mains power supply.
  • Emergency: the UPS can be selected to function only when the mains power supply fails (emergency only mode).
  • Frequency converter operation (50 or 60 Hz).

 High quality output voltage

  • Even with non-linear loads (IT loads with a crest factor of up to 3:1).
  • High short circuit current on bypass.
  • High overload capacity: 150% by inverter (even with mains failure).
  • Filtered, stabilised and reliable voltage (double conversion on-line technology – VFI compliant with EN62040-3), with filters for the suppression of atmospheric disturbances.
  • Power factor correction: UPS input power factor close to 1 and sinusoidal current uptake.

Simplified installation

  • UPS can be installed on a single-phase or three-phase distribution network.
  • Output terminal board + 2 IEC sockets for powering local consumers (computers, modems, etc.).
  • Simplified positioning (built-in castors).

High battery reliability

  • Automatic and manual battery test.
  • Proper battery care is critical to ensuring correct UPS operation in emergency conditions. The Riello UPS battery care system consists of a series of features and capabilities to optimise battery management and obtain the best performance and operating life possible.
  • Unlimited extendible runtime using matching Battery Boxes.
  • The batteries do not cut in during mains failures of

Other features

  • Advanced diagnostics: status, measurements and alarms available on custom LCD display.
  • Low noise (20 kHz, value above audible range).
  • Auto restart (automatic when mains supply is restored, programmable via software or display panel).
  • Emergency function: the UPS can be selected to function only when the mains power supply fails (emergency lights).
  • UPS digital updating (flash upgradeable).

Advanced communications

  • Advanced multi-platform communications for all operating systems and network environments: PowerShield3 monitoring and shutdown software for Windows operating systems 8, 7, Hyper-V, 2012, 2008, and previous versions, Mac OS X, Linux, VMWare ESXi, Citrix XenServer and other Unix operating systems.
  • RS232 serial and USB ports.
  • Slot for installation of communications boards.

MODELSSPM 6SPH 8SPH 10SPH 10 ERSPH 15SPH 20SPH 20 ER
POWER6000 VA/
5400 W
8000 VA/
6400 W
10000 VA/
9000 W
10000 VA/
9000 W
15000 VA/
13500 W
20000 VA/
18000 W
20000 VA/
18000 W

INPUT

Nominal Voltage220-230-240
VAC 1 ph
220-230-240 VAC 1 ph / 380-400-415 VAC 3 ph + N
Minimum voltage without
battery intervention
176 VAC @ 100% load / 110 VAC @ 50% load
Maximum operating
voltage
Nominal frequency50/60 Hz ±10 Hz

BY PASS

Voltage tolerance160 – 276 VAC (selectable in Economy Mode or Smart Active Mode)
Frequency toleranceSelected frequency ±10%
Overload Times125% for 1 min, 150% for 10 seconds

OUTPUT

Nominal Voltage220-230-240 VAC selectable
Voltage distortion< 2% with linear load / < 5% with non-linear load
Current Distortion3%
Frequency50/60 Hz selectable or with automatic selection
Static variation± 1,5 %
Dynamic variation≤ 5% σε 20 ms
WaveformSinusoidal
Crest factor≥ 3:1

BATTERIES

TypeVRLA AGM maintenance-free lead based
Recharge Time6-8 hours
Recharge current
(only for ER versions)
8 Α8 Α

OTHER FEATURES

Net weight (kg)6378842814615748
Dimensions (WxDxH) (mm)262 x 654 x 708350 x 731 x 818
Smart Active Efficiencyup to 98%
Protections Overcurrent – short-circuit – overvoltage – undervoltage – temperature – excessive low battery
Communications USB / RS232 + slot for communications interface
Parallelmax. 3 units in parallel with optional kit
Output socketsTerminal block + 2 IEC 320 C13
StandardsEN 62040-1 EMC EN 62040-2 Directives 2006/95/EC – 2004/108 EC EN 62040-3
Operating temperature0 – 40 ° C
Relative humidity<95% non-condensing
ColourDark grey RAL 7016
Noise level at 1 m (ECO Mode)< 40 dBA
 Moving the UPScastors

sentinel_power_green
Download the Pdf here

CALL US
CONTACT US