The range Neo Pro uses double conversion technology to provide clean, high level quality power to fully protect mission-critical devices such as communications networks, small computer centers, servers, telecoms applications and industrial applications.
Output power factor 0.9
Compared to the online UPSs in the current market, Neo Pro provides higher output power factor up to 0.9.
Wide input voltage range (110 V-300 V)
Neo Pro can provide stable power to connected devices under unstable mains conditions.
Programmable power management outlets
With programmable power management outlets, users can easily and independently control load segments. During power failure, this feature enables users to extend battery time to critical loads by shutting down the non-critical devices.
ECO mode operation for energy saving
Offers efficiency up to 97% to reduce energy usage & operation cost. UPS supplies the loads via static bypass, timely returning to online double conversion when the need arises.
50/60 Hz Frequency Converter Mode
Lock output frequency at 50Hz or 60Hz independently of the input frequency.
Emergency Power Off (EPO) Function
This feature can secure the personnel and equipment in case of emergency by turning off the UPS.
Maintenance bypass available
Internal maintenance bypass assures continuous power to critical devices during UPS maintenance.
Smart battery charger design to optimize battery performance
Neo Pro 6K and 10K are equipped with 3-stage charger for optimized battery performance. This feature extends the useful service life of batteries and optimizes battery recharge time.
DSP technology applied for Neo Pro 6K & 10K
A DSP controller provides an improved and cost-effective solution with high performance.
Neo Pro 6k and 10k can be used in parallel operation with up to 3 units. This function increases power capacity, safety and availability of the system.
SNMP + USB + RS-232
The communication of the UPS is done via the USB or RS-232 and also with SNMP interface.
|MODELS||Neo Pro 6K||Neo Pro 10K|
|1 phase in / 1 phase out|
|Voltage Range||176 – 300 VAC @ 100% load|
|110 – 300 VAC @ 50% load|
|Frequency Range||46 ~ 54 Hz or 56 ~ 64 Hz|
|Power Factor||> 0.99 @ 100% load|
|AC Voltage Regulation (Batt. Mode)||± 1%|
|Frequency Range (Synchronized Range)||46 ~ 54 Hz or 56 ~ 64 Hz|
|Frequency Range (Batt. Mode)||50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz|
|Crest Factor||3:1 (max)|
|Harmonic Distortion||< 3% THD (Linear Load)|
|< 6% THD (Non-Linear Load)|
|Transfer Time||AC Mode to Batt. Mode||Zero|
|Inverter to Bypass||Zero|
|Waveform (Batt. Mode)||Pure sine wave|
|Battery Type||12V / 7AH||12V / 9AH|
|Typical Recharge Time||7 hours recover to 90%||9 hours recover to 90%|
|Charging Current (max.)||1.0 A|
|Charging Voltage||273 VDC ± 1%|
|LCD Panel||UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions|
|Battery Mode||Sounding every 4 seconds|
|Low Battery||Sounding every second|
|Overload||Sounding twice every second|
|Dimension, D X W X H (mm)||592 X 250 X 576|
|Net Weight (kgs)||81||83|
|Humidity and Temperature||20-90 % RH @ 0- 40°C (non-condensing)|
|Noise Level||< 55dBA @ 1 Meter||< 58dBA @ 1 Meter|
|Smart RS-232||Supports Windows 98/2000/2003/XP/Vista/2008, Windows 7, Linux and MAC|
|Power management from SNMP manager and web browser|
Download the Pdf here